Changes
/* Software */
* Spreadsheet: (NC150/NC200 only) A version of 'The Cracker' spreadsheet ported to the NC. (YELLOW-WHITE)
* Blockade/Super Blockade/Trikade: (NC150/NC200 only) Three very similar Tetris-like games. (YELLOW-G)
==Serial Terminal==
NC100:
Press FUNCTION+S to enter Serial terminal. You can press MENU to change the settings.
Here characters that are received will be shown immediatly.
If you want to transfer a file, the best method is to use XMODEM. First you will
need to create a dummy document. (Press FUNCTION + Left Arrow, then Left Arrow, enter
name of doc, and then ESC to quit).
Now if you go to view documents, you can press MENU. From here you can choose
.... and do a xmodem receive document.
NC200:
Press FUNCTION+S to enter Serial terminal. From here you can press MENU, and choose
to do a xmodem receive or send or to setup the terminal. If you press RETURN instead of
MENU, you will enter the terminal like the NC100.
==XMODEM transfer==
NC100:
1. Enter wordprocessor.
2. Start a new document
3. Quit wordprocessor
3. Go to list documents.
4. Press MENU key
5. Here you can navigate the menu to find "XMODEM receive document".
6. Start XMODEM send on PC.
NC200:
1. Enter serial/terminal program.
2. Press MENU
3. Press R (for XMODEM receive)
4. Start XMODEM send on PC.
=== Third-party software for the NC Series ===
* ZCN: CP/M 2.2 compatible operating system. Requires at least a 256K PCMCIA Memory Card. [http://www.ibiblio.org/zcn/]
== The NC and relatives ==
