Amsteam ROMBox

Software

|FLASH,"filename",slot

Where filename is a file from CPC disc, slot is a number from 0 to 6.

Slot 0 is the BASIC slot enabled with the boot DIP switch.

The rest of slots are enabled with the enable DIP switch.

|FLASHLOW,"filename"

Same than |FLASH command but for lower ROM replacement. It's also enabled with the boot DIP switch.

Notice that this command doesn't require the slot number, since there is only one lower slot.

Important: In both commands, an empty filename means to clear the slot.

|LIST

This command lists the current slot assignments for both lower and upper ROMs.

|CLEARALL

This command clears all the slots at once, both lower and upper.

Important: After running any of the commands all the slots will be disabled until a power down is performed.