On a more positive tone, those speccy ports had the merit to exist, or else Amstrad would have a smaller games catalogue.
It is worth noting that Spectrum ports also existed on [[MSX]], [[Enterprise]] 64/128,[[SAM Coupé]] and non-[[Z80]] [[Thomson]] MO/TO, [[SAM Coupé]] and [[Commodore 64|C64]].
==List of Spectrum Ports==
[[List of Speccy Ports]]
==How these should have looked==
* Xyphoes Fantasy
* [[Head Over Heels]]
* Atic Atac
Some CPC games share similarities with the Spectrum version, and probably share a lot of code, yet are in mode 0 (16 colours, lowest resolution). [[Ocean]] made a lot lilke and thanks to a more professional graphic treatment (compared to many other British companies) and actually good porting tactics this produced some of the finest CPC games.
*Spectrum 48K had a 1-bit beeper sound. Playing sounds through the beeper is very CPU intensive. The Amstrad doesn't have a beeper. The only way to simulate the beeper sound would be to convert it to AY sound.
====Input====
* Spectrum has multiple joystick standards. The common standards are Kempston, Sinclair and Cursor. Kempston was a common interface used on the Sinclair made Spectrum's. It plugged into the back of the machine and provided support for a single joystick. This type of joystick doesn't clash with the keyboard. The Sinclair standard is used on the Amstrad made Spectrums. These machines have two joystick ports. The Sinclair standard works by simulating keys pressed on the Spectrum keyboard. (Does the sinclair joystick cause keyboard clash?) All of these standard for the Spectrum supported the directions and 1 fire button. In comparison the Amstrad CPC models have a single joystick port which with a splitter cable can support two joysticks. The joysticks support the directions and up to 3 fire buttons on the CPC, but only 2 fire buttons on the later Plus machines. In addition using the joysticks and keyboard together on the Amstrad CPC causes keyboard clash where unwanted keys are pressed. Clash between joysticks and keys can be avoided with careful choice of keys. This clash was resolved on the Plus and can be resolved with diodes on the CPC joystick port. In general though, Amstrad games supported a single joystick, they didn't use key mappings that would avoid clash and many users didn't have these fixes so the games would suffer from keyboard clash. An example of this can be seen when playing two player Gauntlet where players could be fighting to move where they wanted to.
* The 48K spectrums had a rubber membrane keyboard, later versions had proper keys, and the Amstrad made Spectrum's have the best keyboards. The early Amstrad CPC464's and 664's had really good strong keyboards, comparable to those on the BBC Micro, whereas later ones were more flat and less good. Both Amstrad and Spectrum have a good selection of keys.
* Similar disc format (CP/M based)
==However, the Spectrum+3 uses a different DOS than the Amstrad CPC6128. This means that the functions for reading/writing files are different on the Spectrum compared to the CPC. The Spectrum's DOS is more powerful than the CPC's. It can read CPC discs, Spectrum +3 and PCW discs easily. In order for the Amstrad to read Spectrum and PCW discs, it needs to have a special XDPB (Expanded Disc Parameter Block) configuration installed. The Spectrum +3's DOS is based on the disc functions in Locoscript the CPC's DOS is AMSDOS. The Spectrum's DOS was developed after the CPCs, so clearly they saw the weakness in the CPC's DOS design and improved it. The Spectrum Technical wiki can be found here. This describes the Spectrum hardware in more depth: http://scratchpad.wikia.com/wiki/ZX_Spectrum_technical_information =Consequences of a Spectrum Port= ==Input== The Spectrum has more joystick standards than the CPC, however reading the keyboard and joysticks and handling the input on the Spectrum is much simpler, takes less code and takes less CPU time than on the Amstrad. On the Amstrad it is best to read the keyboard and joystick in one pass and store the data into a buffer which can then be queried later. Then read from this buffer when you need to check the inputs. ==Disc Loading== The Spectrum +3's disc interface had a design that was close to the Amstrad CPC6128's. This meant that disc loading software that used the disc interface directly could be modified easily to be used on the CPC. There are disc versions of the Alkatraz, Hexagon and Speedlock loaders common to both the CPC and Spectrum. However, the method for accessing the DOS is different. The good thing is that both shared good disc interfaces, so a disc loading system on the Spectrum, if ported to the CPC would not be a bad thing.
====Tape Loading====
Both the Spectrum and Amstrad had a similar method for loading or saving on cassette. For both it is CPU intensive and for both the method of representing the 1 or 0 bits is the same.
Some CPC games used the original block loader which meant loading took much longer compared to Spectrum, some used the firmware headerless block loader (CAS READ) which was a bit faster, and some CPC games used a modified Spectrum tape loader (extracted from the Spectrum's ROM and modified for the Amstrad's hardware).
Sometimes the Spectrum loader was modified for the CPC without exact knowledge of how it worked, this resulted in some games with bad loaders that either didn't check for errors, or which didn't work in some circumstances. This lead to unreliable loading.
* Aliens (UK version, original release).
====Colours====
The Spectrum palette (15 colours, bright at bottom):
* Recolour the graphics using the Amstrad's palette to improve the look.
====Colour Clash==from the Cell based colouring==
The cell based colouring used on the Spectrum has its disadvantages. [[image:clash.png|right|thumb|Colour clashing in Knight Tyme. Observe the appearance of the character sprite as it merges with the background. (Background colours have priority here in this game.)]]
* [[Deflektor]] (main play area has one set of colours, status panel has another set)
==Advantages of the cell based colouring==Sound The Spectrum's cell based colouring has advantages. === Conveying state on a HUD === The state of a game play element on the HUD can be coloured accordingly. e.g. a bomb that is about to explode could change colour from white to red. '''What should be done on CPC:'''* If you have enough free palette entries, e.g. mode 0, then you can change the colour for the pen used to display the item in the palette. This is quick. However if you are using mode 1, then the number of palette entries is much more limited and you should draw the bomb in a different way. The consequence of this is that you may need to store additional graphics for this and it will take much longer to update the HUD than on the Spectrum. === General colouring === Since the background and foreground colour can be defined per cell then you can use all the Palette of the Spectrum at once. '''What should be done on CPC:'''* If you are using mode 0 then you are free to define the colours per pixel from the 16 colour palette. This is ok if the chunkier pixels can be used, not so good if there is detail in the graphics that needs to be retained.* If you are using mode 1 then you will see less colour. You can set the colour palette for multiple regions on the screen, or you can use the 4 colour palette more creatively. ==Sound==
There is 1 sound source on 48K spectrums: it's its beeper, and 2 sources of sound on 128K spectrums: beeper and AY.
Beeper sound is simple. The spectrum has a speaker which you can turn on/off through a I/O port on the Spectrum's ULA. To make different sounds, you turn it on and off at different rates, all under control of the CPU. Speaker sound is CPU intenstive intensive because the timing is all done through the CPU and delay loops. The consequence on the Spectrum is that not many games have beeper music during the game, and those that do are often staccato like (e.g. Manic Miner) (the game takes some time to update, then some time for sound, and this repeats). If the sound was made for the Spectrum beeper, this would need to be converted to AY sound for the CPC, the result would not be exactly the same.
Sound written for the AY in the Spectrum can't be ported directly because it would be out of tune, this is down to the difference in master clock given to the AY (1.7Mhz on Spectrum, 1.0Mhz on Amstrad). The music would need to be altered. When this is done, the music is almost the same.
* Super Hang On
====Graphics====
The Spectrum's graphics use 1 bit per pixel to define them. Each byte defines 8 pixels. The colour of each pixel is then defined by the attribute system.
Consequences:
* The pixel data and colours are stored in a different way than the CPC, so some conversion must be done before the graphics can be used. Either the graphics are remade, or often converted through some automatic process.
* There is a trade off between mode 1, keeping the same resolution as the Spectrum but having only 4 colours, or using mode 0, with half the horizontal resolution but 16 colours. The choice depends on the detail required in the graphics.
The following sections describe possible ways to handle the graphics on the Amstrad.
====Techniques used for Graphics====
=====Graphics with transparency==== =====Storage=====
A common way to do this is on the Spectrum is to store 1 byte of mask, followed by 1 byte of pixel data, and to repeat this for the width of the sprite divided by 8. (Each byte representing a 8 pixel wide single line slice of the sprite).
If we consider a sprite which is 16x16. Each byte contains 8 pixels. For each line 2 bytes would be needed for pixel data and 2 bytes for mask. The total storage space required would be (2+2)*8 16 = 32 64 bytes.
If we consider mode 1 on the Amstrad, and we used the same representation, we could freely use 4 colours for the sprites. The Amstrad would also need 2 times the ram space to store the data, because in mode 1 there is half the number of pixels per byte.
So, each byte contains 4 pixels. For each line 4 bytes would be needed for pixel data and 4 for mask: (4+4)*8 16 = 64 128 bytes.
However, if we sacrifice 1 colour, so we have 1 pen which is fully transparent and 3 for opaque sprite colours then we don't need the mask to be stored this way. The mask is common for all sprites and we could store this as a single 256 byte array. We would still need 4 bytes for the pixel data but the result now is: 4*8 16 = 32 64 bytes. The same weight as the Spectrum.
Mode 2 is generally not used for games on the Amstrad because of it's lack of colour. The pixels in this mode are half as wide as the Spectrum's. If the Spectrum data was used directly, which it could be, then the sprites would be half the width of the Spectrum's. We would still be forced to store mask and pixels In this case the data storage is the same as on the Spectrum, and . If we wanted to maintain the same resolution we would need to double up each pixel, effectively magnifying it in the width by 2. The result would be twice the size of the Spectrum data.
If mode 0 is used, we could either store a mask and byte, as for the Spectrum, or more commonly we use pen 0 for full transparent and leave the other 15 pens to define the sprite. We could then use half the number of pixels horizontally and lower resolution too. Each byte now contains 2 pixels. The sprite is 8x16 now = (8/2)*16 = 64 bytes. So again twice This the same storage sizeas for mode 1. If the size of the sprites were too small, then we would need to increase the size and the storage space.
Therefore, depending on the representation, this would determine how much ram is consumed on the Amstrad.
The best it seems is choices are to go for mode 1, and use a common mask table, with 3 colours per sprite. The situation is different if you consider tilesOr use mode 0, here we don't need use a common masktable, with 15 colours per sprite. For the spectrum a 8x16 tile: (8/8)x16 = 16 In both cases we use 256 bytesmore than the Spectrum equivalent graphics. CPC mode 1: (8/4)x16 = 32 bytes CPC mode 0: (4/2)x16 = 32 bytes CPC mode 2: (8/8)x16 = 16 bytes
So we show that some games could be recoloured and still use about the same amount of data as the Spectrum.
The above do not consider the size or speed of the code to clip or draw the sprite to the Amstrad's screen compared to the Spectrum code. The values above assume the Spectrum version is not storing pre-shifted sprites, or using a pre-shift table, and when drawing to pixel positions is shifting the pixel data during draw. The comparison becomes more complicated when these are involved.
Examples of games probably ported from the Spectrum (the use a Spectrum sized screen), in mode 1 and recoloured:
* [[Pacmania]]
=====Real-Time Conversion of Spectrum graphics=Graphics without transparency====
A common way to get the Speccy game running on the CPC was to perform real-time conversion of Spectrum graphics.=====Storage=====
Tiles are often used to define background graphics. These are opaque and don't need masks. The benefit here is that on CPC we can use all the colours in the palette, so for mode 1, all 4 colours can be used and in mode 0 all 16 colours can be used. However on CPC generally non-transparent graphics will often take more storage space: For the spectrum a 8x16 tile: (8/8)x16 = 16 bytes. CPC mode 0: (4/2)x16 = 32 bytes CPC mode 1: (8/4)x16 = 32 bytes CPC mode 2: (8/8)x16 = 16 bytes In mode 0 and mode 1, the tiles on the CPC will take twice as much space compared to the Spectrum. This will impact the memory used and depending on the number of tiles this is a significant memory impact. ====Real-Time Conversion of Spectrum graphics==== A common way to get the Speccy game running on the CPC and using the same storage space for the graphics was to perform real-time conversion from the Spectrum graphics. * Graphics are stored on the Amstrad in the same format as on the Spectrum (2 colour, 1BPPwith sprites having masks)
* Amstrad's mode 1 is used to maintain the same pixel resolution.
* A routine function converts the graphics on-demand, while the game is running, into the form that is displayed for the screen.
Needless to say, this enabled the port without the use of additional graphics artists, so . Therefore it was would be cheaperand easier if a programmer was tasked with making a conversion alone.
Disadvantages:
* This process takes a lot more CPU power compared to the Spectrum version, because in addition to drawing and erasing the sprites, the pixel data must also be converted at the same time.
* This resulted in a significantly slower game.
* Amstrad version had less colours (often as little as 2 colours)
Advantages:
* Pixel data took less RAM compared to storing than if it in Amstrad's mode 1 form, so could run on a 64K Ram machine (CPC464 and CPC664).
=====Mode 0==== When using mode 0, the screen can be reprogrammed to use the same sized screen as when using mode 1 . However the resolution would be 128x192. Using mode 0 has additional impact on the gameplay and game logic:- there are fewer pixels horizontally therefore both tiles and sprites are described by fewer pixels in width (although pixels are wider). Then any calculations that use pixel coordinates will need to be adjusted. This includes positioning sprites on the screen dimensions, sprite to sprite collision, converting sprite pixel coordinates to a tile map location, converting sprite pixel coordinates to a collision map location, determining if a sprite is moving off the right side of the screen. If the original sprites were square on the Spectrum (e.g. 16x16), then with mode 0 they are 8x16, and we may need additional code for these calculations to handle that. - movement per pixel will be faster horizontally than vertically. We can accept that, or if movement is meant to be the same in all directions then sprites may need to move faster vertically to ensure the movement is consistent. This then has an impact on gameplay because sprites will take less time to move over the screen and any time based goals may need to be adjusted to compensate and make the game goals consistent. Using mode 1 is the route to a quicker port because there are less changes to the game code. was stored in an Amstrad native form so the game could run on a 64K Ram machine (CPC464 and CPC664, 464Plus).* If the colour attributes of the Spectrum were not simulated then the attribute data would not need to be stored for the CPC. ====Mode 1====
Amstrad's mode 1 is the closest mode which compares with the Spectrum's graphical abilities.
However, the CPC has a different "pixel clock" compared to the Spectrum. The CPC was designed for a 320x200 display instead of a 256x192 display and in fact the the pixels are smaller on the screen when you compare mode 1 (the closest equivalent on the CPC) to the Spectrum.
So when the screen is reprogrammed, you end up with a larger border on the CPC.
This (the larger border) led to the false argument that the CPC's resolution was inferior to the Spectrum one although the amount of pixels on the screen is EXACTLY the same.
====Double buffering====
TODO:
==Screen dimensions==
By setting CRTC register settings the Amstrad's screen dimensions can be reprogrammed to match the Spectrum's.
The normal values used are R1=32, R6=24.
There are advantages to reprogramming the screen dimension to match the Spectrum's.
* The gameplay is similar because the player sees the same amount of map and there are the same number of enemies and they move in the same way.* Graphics/levels would not need to be designed for a wider screen (e.g. in mode 1, 320 compared to 256)* For a smaller screen less memory is used for the Amstradscreen (16KB vs 12K). The memory used by the screen is the same regardless of CPC mode used. Unused areas can be used to store graphics, code and music. For a 320x200 CPC screen normally takes 16Kat &c000, but when reduced in size it takes 12K.the unused areas are: c600-c7ff, ce00-cfff, d600-d7ff, de00-dfff, e600-e7ff, ee00-efff, f600-f7ff, fe00-ffff
==Random numbers== Sometimes Spectrum games generate random numbers by reading from the Spectrum's ROM which is always readable in the memory range &0000-&3fff. ''Consequences for CPC:'' * There is often not enough memory to store the Spectrum ROM in the Amstrad's memory. If the range read could be determined then possible a smaller range could be stored. * It would be wasteful to store part or all of the Spectrum's ROM in the memory* It is not legal to store any part of the Spectrum's ROM in memory Some games may use the 'R' register to generate a semi-random number. ''Consequences for CPC:'' * The R register value is based on the number and which instructions are executed. It is likely that the number of instructions between each read of the 'R' register could differ. For both of these methods the consequences for CPC are: * the numbers generated are likely to produce numbers which will differ compared to the Spectrum version and therefore the gameplay could be different. It may be subtle, it may be significant.* reading a random number may take more CPU instructions to do this making it slightly slower. Where possible the Spectrum and Amstrad versions should use the same random number generation based on a stored seed. ==Memory arrangement== Spectrum game's often use the memory from &5500-&ffff. ''Consequences for CPC:''- If you are not using a custom disc or tape loader then during loading you will need to preserve the firmware memory regions. The easiest thing to do is start the game lower in memory (&0040), use the default screen at &c000-&ffff, and then once loaded copy data over these areas (provided you are not doing furthur loading/saving). ==Original consequences (under construction)====
The Amstrad CPC was one of the best 8-bit computers of its time in terms of graphical capabilities. But those advanced capabilities had an impact on CPU resources.
On the other hand, as mentioned before, those games weren't always bad. Games with no need of scrolling and with re-coded graphics could actually be good.
=Investigation into a Speccy Port=
Arnoldemu attempted a Speccy Port in 2022-2023 and the result is 'Mayhem'. The documentation with this game has comparisons and describes the decisions made when making this conversion. You can read about the elements of this journey.
=Lists of speccy ports=
Note: these lists are by no means comprehensive, they just include the most high-profile releases.
* [[Mayhem]] - [[https://www.cpc-power.com/index.php?page=detail&num=18884]] A recent Speccy port to CPC and PCW done by a single person. Read the document to see the comparison, issues encountered, choices made, read about the journey.
=='''Computer originals Hits'''==
*Last Ninja2
*Myth, history in the making
*[[Saboteur ]] I
*Saboteur II
*SWIV
*Salamander
*Dragon Breed
*Scramble spiritSpirits
*[[Black Tiger]] - [[Black Tiger CPC-Spectrum Comparison]]
*Strider
*Pit fighter
*Cabal
*Street Fighter]
*Karnov
*Dynasty Wars
*Salamander
*Dragon Breed
*Scramble spiritSpirits
*Black Tiger
*Strider
*'''Gauntlet 3''' : HUD is properly recolored (3 shades) but in-game window is monochrome (1bit coded sprites and tiles)
*'''R-type''' : Monochrome background while sprites still are "coloured" as with Colour attributes, hence even featuring less colours than original Spectrum game, while the entire screen still displays more than the only 4 Mode1 colours...(HUD raster trick). This game was done in 3 weeks by only one man, who simply emulated the speccy stuff on CPC. Given that the Spectrum game was a great release the CPC port is not too bad.
An special mention must go for '''Mevlut "Speccy" Dinc''', one of the worst offenders with nightmares as '''Big Trouble In Little China''', '''Enduro Racer''', '''Hammerfist''', '''Knightmare''', '''Last Ninja 2''', '''Last Ninja 2 Remix''', '''Prodigy''', '''Super Hang-On''' and '''Time Machine'''.
==Semi-lazy==
This was a "good" other way to get rid of Attributes Clashes and having actual "colours" on ZX Spectrum. But some speccy ports were then emulating the attribute system, which can be quite bad because CPC in Mode1 has half the colours the Speccy has.
*'''R-Type''' : the background has a smooth scrolling while the sprites are fixed character grid based. The engine was keepted in R-Type128 modern remake.
*'''Space gun''': this game was even released for Amstrad PLUS... Although coming very late in the CPC era is not really good and was probably rushed to the release.
Providing a game had to deal with 1bpp to 2 bpp conversion, Software Sprites and Scrolling and complicated gameplay, adding some Raster interrupt to the equation is a really bad move and a good way to waste even more CPU time.
==Amstrad interrupt positions==
The following image shows where the Amstrad's interrupt positions are located relative to the screen. Here the CRTC Register values used are R1=32, R2=42, R6=24 and R7=30 and the colours are changed at the start of the interrupt.
To have different positions vertically you can change the value of R7 (and if the monitor will accept it R5) to move the screen up and down.
For example Gryzor sets R7=29 to have a 1 char tall panel at the bottom in mode 1.
To change at later positions you can also use a software timing loop, or fill the time with other code to delay the colour change from a chosen interrupt position.
[[File:Interrupt_positions_spectrum_sized_screen.png|Screenshot of Amstrad interrupt positions showing where mode and colours can be changed quickly relative to pixel graphics. R1=32, R2=42, R6=24,R7=30]]
This image demonstrates that if you wish to use mode 1, and change palette colours for HUD and game area, then the graphics need to be arranged or re-sized so that the colour change positions are most optimal. For some games, the dimensions of the HUD or play area may not allow the palette to be changed easily.
[[Category: Games| ]][[Category:Programming]][[Category:Games Programming]][[Category:CrossDev]][[Category:CPC History]][[Category:Non CPC Computers]]