== Mitsumi D359T3 ==
There is a small SMD resistor on the back of the circuit board marked with the number '''D.C.'''(Disk Change).
Next to it is an empty solder pad marked with '''RDY'''(Ready). Desolder the resistor and move it to the RDY-Position. The drive now outpus outputs a RDY-SignalReady signal instead of a Disk Change signal.
Additional information and pictures at [http://www.sax.de/~zander/bic/bic_tip.html] (german, but at least the picture is helpful)
Break the connection between PIN1 and the small chip nearby.
== Other Links ==[[Drive Compatibility]] Local article about CPC-compatible drives [http://www.pitsch.de/stuff/amiga/floppy.htm Enabling the Ready Signal] - German Site with instructions and photos of how to enable the ready signal for many common floppy drives. [[Category:HardwareDIY]] [[Category:PeripheralsDATA Storage]] [[Category:DIYNon CPC Computers]]