Difference between revisions of "Connector:2nd disc drive (CPC664, CPC6128, CPC6128+)"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→CPC664/CPC6128) |
(→CPC664/CPC6128) |
||
| Line 10: | Line 10: | ||
|''Pin No. (Shugart)''||''Pin No. (CPC manual)''||''Signal Name''||''Description'' | |''Pin No. (Shugart)''||''Pin No. (CPC manual)''||''Signal Name''||''Description'' | ||
|- | |- | ||
| − | |n/a||35||N/C||Schneider CPC6128 only | + | |n/a||"35"||N/C||Schneider CPC6128 only |
| + | |- | ||
| + | |1 (red wire)||34||GND||Ground | ||
|- | |- | ||
|2||33||N/C (/REDWC)||Density Select 1=Low/0=High | |2||33||N/C (/REDWC)||Density Select 1=Low/0=High | ||
| Line 44: | Line 46: | ||
|32||3||/SIDE1||0=Side 1 Select | |32||3||/SIDE1||0=Side 1 Select | ||
|- | |- | ||
| − | |34||1||/DSKCHG (CPC: /RDY)||1=Disk Change/0=Ready (CPC: Won't check for 1) | + | |34||1 (blue wire)||/DSKCHG (CPC: /RDY)||1=Disk Change/0=Ready (CPC: Won't check for 1) |
| − | | | + | |- |
| + | |All others||Ground | ||
| + | |) | ||
Revision as of 09:35, 20 April 2007
CPC664/CPC6128
The following table lists the signal on the "2nd Disk Drive" connector on the back of the CPC664/CPC6128 Signal names in simple brackets show the meaning the signal has today. For your convenience, the pin no. are given as specified in the Shugart standard first, followed by the pin no. as assigned by Amstrad and shown in the manual.
Note that pins 35 and 36 (Amstrad enumeration) exist on Schneider CPC6128 only due to the use of a 36pin Centronics connector.
| Pin No. (Shugart) | Pin No. (CPC manual) | Signal Name | Description |
| n/a | "35" | N/C | Schneider CPC6128 only |
| 1 (red wire) | 34 | GND | Ground |
| 2 | 33 | N/C (/REDWC) | Density Select 1=Low/0=High |
| 4 | 31 | N/C | Reserved |
| 6 | 29 | N/C | Reserved |
| 8 | 27 | /Index | 0=Index |
| 10 | 25 | N/C (/MOTEA) | -/- (0=Motor Enable Drive 0) |
| 12 | 23 | /DRVSB | Drive Select 1 |
| 14 | 21 | N/C (/DRVSA) | -/-(Drive Select 0) |
| 16 | 19 | /MOTEB | 0=Motor Enable Drive 1 |
| 18 | 17 | /DIR | 0=Direction Select |
| 20 | 15 | /Step | 0=Head Step |
| 22 | 13 | /WDATE | Write Data |
| 24 | 11 | /WGATE | Floppy Write Enable, 0=Write Gate |
| 26 | 9 | /TRK00 | 0=Track 00 |
| 28 | 7 | /WPT | 0=Write Protect |
| 30 | 5 | /RDATA | Read Data |
| 32 | 3 | /SIDE1 | 0=Side 1 Select |
| 34 | 1 (blue wire) | /DSKCHG (CPC: /RDY) | 1=Disk Change/0=Ready (CPC: Won't check for 1) |
| All others | Ground | ) |
