Difference between revisions of "CP/M 3.0"
From CPCWiki - THE Amstrad CPC encyclopedia!
(→Amstrad's implementation of CP/M+) |
|||
| Line 12: | Line 12: | ||
On side 1 was CP/M 2.2. | On side 1 was CP/M 2.2. | ||
| − | * Amstrad CP/M+ uses Amstrad's "System" format. This is 40 tracks, 1 side, 9 sectors per track numbered &41-&49. There are two reserved tracks, then the directory which has 64 entries | + | * Amstrad CP/M+ uses Amstrad's "System" format. This is 40 tracks, 1 side, 9 sectors per track numbered &41-&49. Each sector is 512KB. There are two reserved tracks, then the directory which has 64 entries (which occupies 4 sectors) and then the data area. |
* CP/M is booted using an RSX command "|CPM" which is implemented in the Amstrad disc rom (AMSDOS). | * CP/M is booted using an RSX command "|CPM" which is implemented in the Amstrad disc rom (AMSDOS). | ||
* |CPM loads track 0, side 0, sector &41 into RAM at &100-&2ff. This is the boot sector and contains the boot program. | * |CPM loads track 0, side 0, sector &41 into RAM at &100-&2ff. This is the boot sector and contains the boot program. | ||
Revision as of 06:21, 28 April 2018
CPM 3.0 (also known as CPM+) was available on the 2nd System Disc for CPC6128 but there were other implementations available.
Graduate Software's implementation of CP/M+ on ROM
Amstrad's implementation of CP/M+
Amstrad distributed CP/M+ on the side 4 of the system discs that came with the CPC6128. It provided 61K TPA. On side 1 was CP/M 2.2.
- Amstrad CP/M+ uses Amstrad's "System" format. This is 40 tracks, 1 side, 9 sectors per track numbered &41-&49. Each sector is 512KB. There are two reserved tracks, then the directory which has 64 entries (which occupies 4 sectors) and then the data area.
- CP/M is booted using an RSX command "|CPM" which is implemented in the Amstrad disc rom (AMSDOS).
- |CPM loads track 0, side 0, sector &41 into RAM at &100-&2ff. This is the boot sector and contains the boot program.
- The boot program then loads the directory from track 2, sector &41.
- The boot program locates a program with extension "EMS".
- This program is loaded into RAM at &c00.
- This is then executed. (EMS contains the BIOS, BDOS and relocates and re-configures the memory. CP/M doesn't use the CP/M 2.2 BIOS from the Amstrad disc ROM.)
