Difference between revisions of "Joystick Y-cables"
From CPCWiki - THE Amstrad CPC encyclopedia!
m (Weblinks and manual not usefull in this article -> removed) |
|||
| Line 4: | Line 4: | ||
These were made by 3rd party vendors as a replacement to the original [[Amstrad JY-1/JY-2 joysticks|JY-2 joystick]] for the Amstrad CPC computers. | These were made by 3rd party vendors as a replacement to the original [[Amstrad JY-1/JY-2 joysticks|JY-2 joystick]] for the Amstrad CPC computers. | ||
| − | In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with one joystick port only which had two | + | In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with one joystick port only which had two common pins. The idea was to sell one joystick which forwarded the second common signal to a built-in joystick port, to which the second joystick could be connected. |
As the quality of the Amstrad joysticks was lousy, using an Y-cable together with other joysticks was the preferred solution. | As the quality of the Amstrad joysticks was lousy, using an Y-cable together with other joysticks was the preferred solution. | ||
Revision as of 08:39, 24 November 2009
These were made by 3rd party vendors as a replacement to the original JY-2 joystick for the Amstrad CPC computers.
In order to push sales of Amstrad's own joysticks, Amstrad designed the CPC with one joystick port only which had two common pins. The idea was to sell one joystick which forwarded the second common signal to a built-in joystick port, to which the second joystick could be connected.
As the quality of the Amstrad joysticks was lousy, using an Y-cable together with other joysticks was the preferred solution.
